Siemens SINUMERIK 810D Configuration Manual page 45

03.02
12.95
SIEMENS
SIMODRIVE
MS
(I/RF or UPS)
Fig. 3-2 SINUMERIK 810D overall configuration with SIMODRIVE 611 power module
Installing the CCU
Sequence of operations:
1. Connect the battery on the CCU module
2. Place the CCU module in the guide rails of the CCU box and secure it.
The slotted screws (1) must be tightened (see Fig. 3-3) to ensure compliance
with EMC requirements and to guarantee the necessary vibration resistance.
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
3 Design and Installation of the 810D
3.2 Installing the SINUMERIK 810D
Axis expansion plug-in unit, left
810D
PS
(CCU3)
Axis expansion
plug-in unit
PS
3-43