Siemens SINUMERIK 810D Configuration Manual page 138

Appendix A to EC Declaration of Conformity
A11: Typical system configuration
SINUMERIK 810D
Metal box
Operator panel
front
Mach. contr.
panel
Fil- -
MS SIN.
ter
810D
**)
*)
Throttle
Supply terminal
S
S
Note
The sketch of the system configuration shows only the basic measures for
conformance with directive 89/336/EC for a typical system configuration.
In addition to this, especially if the system configuration is not the same, you
must follow the installation instructions for an EMC-compliant system
configuration contained in the product documentation and in the EMC
installation guideline for SINUMERIK; SIROTEC and SIMODRIVE (Order No.:
6FC5297-0AD30-0AP1).
C-136
No. E002 V 26/03/99
QWERTY - -
Keyboard
Terminal
strips
810D
611
I/Os
PS
Mod.
810D
I/Os
810D
I/Os
NCK
I/O devs.
All the components that according to the ordering information are approved
for the system network of SINUMERIK 810D comply with directive
89/336/EC within the network.
For conformity to the standards, see Appendix C.
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
*) for I/RF module and OI module 28kW
**) Filter in module network or separate
El. handwheel
Machine bed
G
M
M
E Siemens AG, 2002. All rights reserved
09.01
12.95
G