Electromagnetic Compatibility (Emc) - Siemens SINUMERIK 810D Configuration Manual

2 Installation Conditions
2.1 Secondary electrical conditions
2.1.1

Electromagnetic compatibility (EMC)

Radio interference
Relevant standards: EN 50081-1 and -2, EN 55011, EN 55022, EN 61800-3
Table 2-1
Interference suppression in cables
Interference radiation
If compliance with limit value class B (residential areas) is required, please con-
tact your local Siemens office or representative.
Note
Radio interference suppression must be considered by the user for the
complete installation. Particular attention should be paid to cables.
Please contact your local Siemens office or representative for assistance and
advice.
Noise immunity
Relevant standards: EN 50178, EN 61000-3-2 and -3-3,
EN 61000-6-2, EN 61000-4-2, -3, -4, -5, -6, -8, and -11
EN 61800-3
Tested phenomena:
S
S
S
S
S
S
S
S
S
2-26
Limit values for radio interference
Static discharging
Radio frequency irradiation
Conducted interference (burst)
Surge voltages
HF flow on cables
Magnetic fields with electrical power frequencies
Voltage dips and interruptions
Voltage fluctuations and flicker
Harmonic currents.
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
Limit value in accordance with
Limit value class A for use in industrial
areas
Limit value class A for use in industrial
areas
E Siemens AG, 2002. All rights reserved
11.02
12.95