Dmp Compact Module 1O Analog (6Fc5 111-0Ca05-0Aa0) - Siemens SINUMERIK 810D Configuration Manual

12.95
8.6

DMP compact module 1O analog (6FC5 111-0CA05-0AA0)

The DMP compact module 1O analog is an encapsulated module. It can be
inserted into an NCU terminal block slot as a plug--on module. (maximum of four
modules per terminal block)
Fig. 8-8
S
Interfaces
S
S
Display elements
One LED as status display for power supply.
LED lights up:
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
8.6 DMP compact module 1O analog (6FC5 111-0CA05-0AA0)
Status
POWER
SUPPLY
LED
O.K.
Strip label
ANALOG
OUT
Fixing screw
Front and side view of DMP compact module 1 O analog
One 30-way plug-in connector X1 for connection to the NCU terminal block.
4-way terminal X3 (Phoenix, type MC1.5/4-ST-3.81, Order No. for X3:
1828126) for connecting the supply voltage for the analog part and X2
(Phoenix, type MSTB2.5/4-ST-5.08 GRAY, Order No. for X2: 18 40 942) for
connecting the analog output.
The terminals are of the plug-in type and can be mechanically coded by the
user.
internal power supply OK.
8 DMP Compact Modules
P1 P2 M1 M2
24VDC
0V
X3
X1
4 3 2 1
X2
Terminal:
1, 4 ... Shield
2 ... Analog output Out+
2.5
3 ... Analog output Out--
1.5
Supply terminals
8-115