Dmp Compact Module 8O (6Fc5 111-0Ca03-0Aa1) - Siemens SINUMERIK 810D Configuration Manual

12.95
8.3

DMP compact module 8O (6FC5 111-0CA03-0AA1)

The DMP compact module 8O is an encapsulated module. It can be inserted
into an NCU terminal block slot as a plug--on module.
Strip label
Fixing screw
Fig. 8-3
S
Interfaces
S
S
Display elements
Eight LEDs as status display for the logic output states. As from product version
B the LEDs will go out if the load voltage fails.
LEDs light up:
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
8.3 DMP compact module 8O (6FC5 111-0CA03-0AA1)
X3
Status
0
LEDs
.
.
7
X2
Outputs
OUT 0 ... OUT 3
Front and side view of DMP compact module 8O
Terminal P M 7/3
X3 24V 0V OUT 7
X2 24V 0V OUT 3
One 30-way plug-in connector X1 for connection to the NCU terminal block.
6-way terminals X3 and X2 (Phoenix, type MSTB2.5/6-ST-5.08 GRAY Order
No. for X3: 18 28 647 and for X2: 18 28 168) for connecting the eight out-
puts and the load supply voltage.
The terminals are of the plug-in type and can be mechanically coded by the
user.
Output ON.
8 DMP Compact Modules
24V DC 2.5
LOAD
0V
X3 P M 7 6 5 4
X1
X2 0 1 2 3 M P
0V
24V DC 2.5
LOAD
6/2 5/1 4/0
OUT 6 OUT 5 OUT 4
OUT 2 OUT 1 OUT 0
Outputs
OUT 7 ... OUT 4
8-107