Axis Expansion - Siemens SINUMERIK 810D Configuration Manual

Axis Expansion

5.1 Axis expansion plug-in unit
Application
The axis expansion plug-in unit is mounted in a SIMODRIVE 611 power module
and then connected to the SINUMERIK 810D at axis expansion terminal
X304--X306. The plug-in unit is designed for use in 1-axis and 2-axis power
modules.
A left axis expansion plug-in unit is available for the CCU3 with the terminal of
connector X307 (CCU3) and X301 (expansion plug-in unit) at the same height.
SIEMENS
SIMODRIVE
MS
(I/RF or UPS)
Fig. 5-1
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
Axis expansion plug-in unit, left
810D
PS
(CCU3)
Left and right axis expansion plug-in unit for SINUMERIK 810D with
SIMODRIVE 611 power modules
5
Axis expansion
plug-in unit
PS
5-83