Siemens SINUMERIK 810D Configuration Manual page 139

09.01 09.01
12.95
Appendix C to the EC Declaration of Conformity
The conformity of products to council directive 89 / 336 / EC including updates 91 / 263 / EC, 92 / 31 / EC,
93 / 68 / EC and 93 / 97 / EC was demonstrated by testing them according to the following product stan-
dard, technical basic standards and the basic standards listed therein. Different standard requirements
apply for the SINUMERIK, SIMOTION, SIMATIC, SIROTEC and SIMODRIVE product categories.
C1 product category SINUMERIK
Technical basic standard radio interference/industrial sector: EN 50081
Basic standards:
EN 55011 + A1 + Bbl. 1
Technical basic standard immunity to noise/industrial sector:EN 61000
Basic standards:
EN 61000-4-2 + A1
EN 61000-4-3 + A1
EN 61000-4-4
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
C2 Product category SIMODRIVE, SINUMERIK 810D:
Product standard:
EN 61800-3 + A11
C3 Standards thus complied with:
1): VDE 0839 Part 81-2
2): VDE 0875 Part 11+ Bbl. 1
IEC/CISPR 11 + A1 + 28
3): VDE 0839 Part 6-2
IEC 61000--6--2
4): VDE 0847 Part 4-2 + A1
IEC 61000-4-2 + A1
5): VDE 0847 Part 4-3
IEC 61000-4-3 + A1
___________________________________
*)
except SINUMERIK 810D
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
No. E002
*)
, SIMOTION, SIMATIC, SIROTEC:
Test topic:
2) Radio interference
Test topic:
4) Static discharge
5) High--frequency irradiation (amplitude modulated)
6) Rapid transients (burst)
7) HF flow on cables
8) Magnetic fields with electrical power frequencies
9) Voltage dips and voltage interruptions
Test topic:
10) Variable speed electrical drives;
EMC product standard including special test procedures
6):
7):
8):
9):
10):
VDE 0847 Part 4-4
IEC 61000-4-4
VDE 0847 Part 4-6
IEC 61000-4-6
VDE 0847 Part 4-8
IEC 61000-4-8
VDE 0847 Part 4-11
IEC 61000-4-11
VDE 0160 Part 100
IEC 61800-3
2 1)
-
6 2 3)
- -
J
C-137