Table of Contents
Advertisement
The setting of the real-time accounting interval somewhat depends on the performance of the NAS and
the HWTACACS server. A shorter interval requires higher performance. Use a longer interval when there
are a large number of users (more than 1000, inclusive).
Table 8 Recommended real-time accounting intervals
Number of users
1 to 99
100 to 499
500 to 999
1000 or more
Examples
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
timer response-timeout (HWTACACS scheme view)
Syntax
timer response-timeout seconds
undo timer response-timeout
View
HWTACACS scheme view
Default level
2: System level
Parameters
seconds: HWTACACS server response timeout period in seconds, in the range 1 to 300.
Description
Use the timer response-timeout command to set the HWTACACS server response timeout timer.
Use the undo timer command to restore the default.
By default, the HWTACACS server response timeout time is 5 seconds.
HWTACACS is based on TCP. If the server response timeout timer or the TCP timeout timer times out, the
device will be disconnected from the HWTACACS server.
Related commands: display hwtacacs.
Examples
# Set the HWTACACS server response timeout timer to 30 seconds for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer response-timeout 30
Real-time accounting interval (minute)
3
6
12
15 or more
88
Advertisement
Table of Contents
