Table of Contents
Advertisement
security-policy-server
Syntax
security-policy-server ip-address
undo security-policy-server { ip-address | all }
View
RADIUS scheme view
Default level
2: System level
Parameters
ip-address: Specifies a security policy server by its IP address.
all: Specifies all security policy servers.
Description
Use the security-policy-server command to specify a security policy server for a RADIUS scheme.
Use the undo security-policy-server command to remove one or all security policy servers for a RADIUS
scheme.
By default, no security policy server is specified for a RADIUS scheme.
You can specify up to eight security policy servers for a RADIUS scheme.
You can change security policy servers for a RADIUS scheme only when no user is using the scheme.
Related commands: radius nas-ip.
Examples
# Specify security policy server 10.1 10.1.2 for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] security-policy-server 10.110.1.2
server-type
Syntax
server-type { extended | standard }
undo server-type
View
RADIUS scheme view
Default level
2: System level
Parameters
extended: Specifies the extended RADIUS server (generally iMC), which requires the RADIUS client and
RADIUS server to interact according to the procedures and packet formats provisioned by the proprietary
RADIUS protocol.
64
Advertisement
Table of Contents
