Display Arp Anti-Attack Source-Mac - HP A5500 EI Command Reference Manual

display arp anti-attack source-mac

Syntax
display arp anti-attack source-mac { slot slot-number | interface interface-type interface-number } [ | {
begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Displays attacking MAC addresses detected on the interface.
slot slot-number: Displays attacking MAC addresses detected on the specified device. If the device is in
an IRF, the slot-number argument represents the member ID of the device; if the device is not in any IRF,
the slot-number argument represents the device ID.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display arp anti-attack source-mac command to display attacking MAC addresses detected by
source MAC address based ARP attack detection.
If no interface is specified, the display arp anti-attack source-mac command displays attacking MAC
addresses detected on all the interfaces.
Examples
# Display the attacking MAC addresses detected by source MAC address based ARP attack detection.
<Sysname> display arp anti-attack source-mac slot 1
Source-MAC
23f3-1122-3344
23f3-1122-3355
23f3-1122-33ff
23f3-1122-33ad
23f3-1122-33ce
VLAN ID Interface
4094 GE1/0/1
4094 GE1/0/2
4094 GE1/0/3
4094 GE1/0/4
4094 GE1/0/5
320
Aging-time
10
30
25
30
2