Table of Contents
Advertisement
interval minutes: Specifies the polling interval in minutes, in the range 5 to 168.
Description
Use the certificate request polling command to specify the certificate request polling interval and attempt
limit.
Use the undo certificate request polling command to restore the defaults.
By default, the polling is executed every 20 minutes for up to 50 times.
After an applicant makes a certificate request, the CA might need a long period of time if it verifies the
certificate request manually. During this period, the applicant needs to query the status of the request
periodically to get the certificate as soon as possible after the certificate is signed.
Related commands: display pki certificate.
Examples
# Specify the polling interval as 15 minutes and the maximum number of attempts as 40.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request polling interval 15
[Sysname-pki-domain-1] certificate request polling count 40
certificate request url
Syntax
certificate request url url-string
undo certificate request url
View
PKI domain view
Default level
2: System level
Parameters
url-string: URL for certificate request, a case-insensitive string of 1 to 127 characters. It comprises the
location of the server and the location of CGI command interface script in the format
http://server_location/ca_script_location, where server_location must be an IP address and does not
support domain name resolution.
Description
Use the certificate request url command to specify the URL for certificate request through SCEP.
Use the undo certificate request url command to remove the configuration.
By default, no certificate request URL is specified for a PKI domain.
Examples
# Specify the certificate request URL.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1]
http://169.254.0.100/certsrv/mscep/mscep.dll
certificate
222
request
url
Advertisement
Table of Contents
