Reset Radius Statistics; Reset Stop-Accounting-Buffer - HP A5500 EI Command Reference Manual

reset radius statistics

Syntax
reset radius statistics [ slot slot-number ]
View
User view
Default level
2: System level
Parameters
slot slot-number: Specifies the member number of the switch in the IRF fabric, which you can display with
the display irf command. The value range for the slot-number argument depends on the number of
members and numbering conditions in the current IRF fabric. If no IRF fabric exists, the slot-number
argument is the current device number.
Description
Use the reset radius statistics command to clear RADIUS statistics.
Related commands: display radius scheme.
Examples
# Clear RADIUS statistics.
<Sysname> reset radius statistics

reset stop-accounting-buffer

Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id | time-range
start-time stop-time | user-name user-name } [ slot slot-number ]
View
User view
Default level
2: System level
Parameters
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a string of 1 to 32
characters.
session-id session-id: Specifies a session by its ID, a string of 1 to 50 characters.
time-range start-time stop-time: Specifies a time range by its start time and end time in the format
HH:MM:SS-MM/DD/YYYY or HH:MM:SS-YYYY/MM/DD.
user-name user-name: Specifies a username based on which to reset the stop-accounting buffer. The
username is a case-sensitive string of 1 to 80 characters. The format of the user-name argument (for
example, whether the domain name should be included) must comply with that specified for usernames to
be sent to the RADIUS server in the RADIUS scheme.
slot slot-number: Specifies the member number of the switch in the IRF fabric, which you can display with
the display irf command. The value range for the slot-number argument depends on the number of
57