Table of Contents
Advertisement
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1 to 32
characters.
Description
Use the accounting login command to configure the accounting method for login users.
Use the undo accounting login command to restore the default.
By default, the default accounting method for the ISP domain is used for login users.
The specified RADIUS or HWTACACS scheme must have been configured.
Accounting is not supported for login users that use FTP.
Related commands: local-user, accounting default, hwtacacs scheme, and radius scheme.
Examples
# Configure ISP domain test to use local accounting for login users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting login local
# Configure ISP domain test to use RADIUS accounting scheme rd for login users and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting login radius-scheme rd local
accounting optional
Syntax
accounting optional
undo accounting optional
View
ISP domain view
Default level
2: System level
Parameters
None
Description
Use the accounting optional command to enable the accounting optional feature.
Use the undo accounting optional command to disable the feature.
By default, the feature is disabled.
After you configure the accounting optional command for a domain, a user that will be disconnected
otherwise can continue to use the network resources when no accounting server is available or the
communication with the current accounting server fails. However, the device will not send real-time
accounting updates for the user anymore. The accounting optional feature applies to scenarios where
accounting is not important.
5
Advertisement
Table of Contents
