Local User Configuration Commands; Access-Limit - HP A5500 EI Command Reference Manual

Hide thumbs Also See for A5500 EI:
Table of Contents

Advertisement

Default level
2: System level
Parameters
active: Places the ISP domain in the active state to allow the users in the ISP domain to request network
services.
block: Places the ISP domain in the blocked state to prevent users in the ISP domain from requesting
network services.
Description
Use the state command to set the status of an ISP domain.
Use the undo state command to restore the default.
By default, an ISP domain is in the active state.
By blocking an ISP domain, you disable users of the domain that are offline from requesting network
services. The online users are not affected.
Related commands: domain.
Examples
# Place the current ISP domain test to the state of blocked.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] state block

Local user configuration commands

access-limit

Syntax
access-limit max-user-number
undo access-limit
View
Local user view
Default level
3: Manage level
Parameters
max-user-number: Maximum number of concurrent users of the current local user account, in the range 1
to 1024.
Description
Use the access-limit command to limit the number of concurrent users of a local user account.
Use the undo access-limit command to remove the limitation.
By default, there is no limit to the number of users who concurrently use the same local user account.
This command takes effect only when local accounting is used for the user account.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

A5500 si

Table of Contents