Table of Contents
Advertisement
ssh client source
Syntax
ssh client source { ip ip-address | interface interface-type interface-number }
undo ssh client source
View
System view
Default level
3: Manage level
Parameters
ip ip-address: Specifies a source IPv4 address.
interface interface-type interface-number: Specifies a source interface by its type and number.
Description
Use the ssh client source command to specify the source IPv4 address or source interface of the SSH
client.
Use the undo ssh client source command to remove the configuration.
By default, an SSH client uses the IP address of the interface specified by the route of the device to access
the SSH server.
Related commands: display ssh client source.
Examples
# Specify the source IPv4 address of the SSH client as 192.168.0.1.
<Sysname> system-view
[Sysname] ssh client source ip 192.168.0.1
ssh2
Syntax
ssh2 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } | prefer-ctos-
cipher { 3des | aes128 | des } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex {
dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des | aes128 | des } | prefer-
stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *
View
User view
Default level
0: Visit level
Parameters
server: IPv4 address or host name of the server, a case-insensitive string of 1 to 20 characters.
port-number: Port number of the server, in the range 0 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the server belongs to, where vpn-
instance-name is a case-sensitive string of 1 to 31 characters. This keyword and argument combination is
275
Advertisement
Table of Contents
