Table of Contents
Advertisement
undo certificate request mode
View
PKI domain view
Default level
2: System level
Parameters
auto: Requests certificates in auto mode.
key-length: Length of the RSA keys in bits, in the range 512 to 2048. It is 1024 bits by default.
cipher: Displays the password in cipher text.
simple: Displays the password in clear text.
password: Password for certificate revocation, a case-sensitive string of 1 to 31 characters.
manual: Requests certificates in manual mode.
Description
Use the certificate request mode command to set the certificate request mode.
Use the undo certificate request mode command to restore the default.
By default, manual mode is used.
In auto mode, an entity automatically requests a certificate from an RA or CA when it has no certificate.
However, if the certificate will expire or has expired, the entity does not initiate a re-request automatically.
To have a new local certificate, you need to request one manually. In manual mode, all operations
associated with certificate request are carried out manually.
Related commands: pki request-certificate.
Examples
# Specify to request a certificate in auto mode.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request mode auto
certificate request polling
Syntax
certificate request polling { count count | interval minutes }
undo certificate request polling { count | interval }
View
PKI domain view
Default level
2: System level
Parameters
count count: Specifies the maximum number of attempts to poll the status of the certificate request, in the
range 1 to 100.
221
Advertisement
Table of Contents
