Ssh Client First-Time Enable - HP A5500 EI Command Reference Manual

View
System view
Default level
2: System level
Parameters
server: IP address or name of the server, a string of 1 to 80 characters.
assign publickey keyname: Specifies the name of the host public key of the server, a string of 1 to 64
characters.
Description
Use the ssh client authentication server command on a client to configure the host public key of a server
so that the client can determine whether the server is trustworthy.
Use the undo ssh authentication server command to remove the configuration.
By default, the host public key of the server is not configured, and when logging into the server, the client
uses the IP address or host name used for login as the public key name.
If the client does not support first-time authentication, it will reject unauthenticated servers. In this case,
you need to configure the public keys of the servers and specify the mappings between public keys and
servers on the client, so that the client uses the correct public key of a server to authenticate the server.
The specified host public key of the server must already exist.
Related commands: ssh client first-time enable.
Examples
# Configure the public key of the server with the IP address of 192.168.0.1 to be key1.
<Sysname> system-view
[Sysname] ssh client authentication server 192.168.0.1 assign publickey key1

ssh client first-time enable

Syntax
ssh client first-time enable
undo ssh client first-time
View
System view
Default level
2: System level
Parameters
None
Description
Use the ssh client first-time enable command to enable the first-time authentication function.
Use the undo ssh client first-time command to disable the function.
By default, the function is enabled.
273