Display Sftp Client Source; Exit - HP A5500 EI Command Reference Manual

-rwxrwxrwx
-rwxrwxrwx
-rwxrwxrwx
drwxrwxrwx
drwxrwxrwx
-rwxrwxrwx

display sftp client source

Syntax
display sftp client source [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display sftp client source command to display the source IP address or source interface currently
set for the SFTP client.
If neither source IP address nor source interface is specified for the SFTP client, the system displays the
message ―Neither source IP address nor source interface was specified for the SFTP client.‖
Related commands: sftp client source.
Examples
# Display the source IP address of the SFTP client.
<Sysname> display sftp client source
The source IP address you specified is 192.168.0.1

exit

Syntax
exit
View
SFTP client view
Default level
3: Manage level
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
225 Aug 24 08:01 pubkey2
283 Aug 24 07:39 pubkey1
225 Sep 28 08:28 pub1
0 Sep 28 08:24 new1
0 Sep 28 08:18 new2
225 Sep 28 08:30 pub2
283