Nas Device-Id (Available Only On The A5500 Ei) - HP A5500 EI Command Reference Manual

authentication: Sets the shared key for RADIUS authentication/authorization packets.
string: Shared key, a case-sensitive string of 1 to 64 characters.
Description
Use the key command to set the shared key for RADIUS authentication/authorization or accounting
packets.
Use the undo key command to restore the default.
By default, no shared key is configured.
The shared key that is specified during the configuration of the RADIUS server, if any, takes precedence.
A shared key configured in this task takes effect only if no shared key of the same type is specified during
RADIUS server configuration.
You must ensure that the same shared key is set on the device and the RADIUS server.
Related commands: display radius scheme.
Examples
# Set the shared key for authentication/authorization packets to hello for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key authentication hello
# Set the shared key for accounting packets to ok for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key accounting ok

nas device-id (available only on the A5500 EI)

Syntax
nas device-id device-id
undo nas device-id
View
System view
Default level
2: System level
Parameters
device-id: Device ID for the device, which can be 1 or 2.
Description
Use the nas device-id command to specify the device ID to be used in stateful failover mode. The two
devices work in stateful failover mode use the device IDs of 1 and 2 respectively.
Use the undo nas device-id command to restore the default.
By default, a device works in standalone mode and has no device ID.
Configuring or changing the device ID of a device will log out all online users of the device.
The two devices work in stateful failover mode must use the device IDs of 1 and 2 respectively.
47