Secondary Authentication (Radius Scheme View) - HP A5500 EI Command Reference Manual

NOTE:
The shared key configured by this command takes precedence over that configured by the key
string
accounting
Related commands: key, radius scheme, state, and vpn-instance (RADIUS scheme view).
Examples
# Specify the secondary accounting server and UDP port number for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary accounting 10.110.1.1 1813
# Specify two secondary accounting servers for RADIUS scheme radius2, with the server IP addresses of
10.1 10.1.1 and 10.1 10.1.2, and the UDP port number of 1813.
<Sysname> system-view
[Sysname] radius scheme radius2
[Sysname-radius-radius2] secondary accounting 10.110.1.1 1813
[Sysname-radius-radius2] secondary accounting 10.110.1.2 1813

secondary authentication (RADIUS scheme view)

Syntax
secondary authentication { ipv4-address [ port-number | key string | vpn-instance vpn-instance-name ] *
| ipv6 ipv6-address [ port-number | key string ] * }
undo secondary authentication [ ipv4-address | ipv6 ipv6-address ]
View
RADIUS scheme view
Default level
2: System level
Parameters
ipv4-address: IPv4 address of the secondary authentication/authorization server, in dotted decimal
notation. The default is 0.0.0.0.
ipv6 ipv6-address: IPv6 address of the secondary authentication/authorization server.
port-number: UDP port number of the secondary authentication/authorization server, which ranges from 1
to 65535 and defaults to 1812.
key string: Specifies the shared key for exchanging authentication/authorization packets with the
secondary RADIUS authentication/authorization server. A shared key is a case-sensitive string of 1 to 64
characters.
vpn-instance
authentication/authorization server belongs to, where vpn-instance-name is a case-sensitive string of 1 to
31 characters. If the server is on the public network, do not specify this keyword and argument
combination.
Description
Use the secondary authentication command to specify secondary RADIUS authentication/authorization
servers for a RADIUS scheme.
command.
vpn-instance-name: Specifies the MPLS L3VPN
62
that the secondary RADIUS