Table of Contents
Advertisement
Quiet Period
Supp Timeout
Reauth Period
The maximal retransmitting times
EAD quick deploy configuration:
EAD timeout:
The maximum 802.1X user resource number is 1024 per slot
Total current used 802.1X resource number is 1
GigabitEthernet1/0/1
802.1X protocol is enabled
Handshake is disabled
Handshake secure is disabled
802.1X unicast-trigger is enabled
Periodic reauthentication is disabled
The port is an authenticator
Authenticate Mode is Auto
Port Control Type is Mac-based
802.1X Multicast-trigger is enabled
Mandatory authentication domain: NOT configured
Guest VLAN: 4
Auth-fail VLAN: NOT configured
Max number of on-line users is 256
EAPOL Packet: Tx 1087, Rx 986
Sent EAP Request/Identity Packets : 943
EAP Request/Challenge Packets: 60
EAP Success Packets: 29, Fail Packets: 55
Received EAPOL Start Packets : 60
EAPOL LogOff Packets: 24
EAP Response/Identity Packets : 724
EAP Response/Challenge Packets: 54
Error Packets: 0
1. Authenticated user : MAC address: 0015-e9a6-7cfe
Controlled User(s) amount to 1
Table 9 Output description
Field
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
EAD quick deploy is enabled
Transmit Period
Handshake Period
Reauth Period
Quiet Period
Quiet Period Timer is disabled
60 s,
30 s,
3600 s
30m
is link-up
Description
Specifies whether 802.1X is enabled globally
Specifies whether CHAP authentication is enabled
Specifies whether EAD fast deployment is enabled
Username request timeout timer in seconds
Handshake timer in seconds
Periodic re-authentication timer in seconds
Quiet timer in seconds
Status of the quiet timer. In this example, the quiet timer is
enabled.
97
Quiet Period Timer is disabled
Server Timeout
3
100 s
Advertisement
Table of Contents
