Dot1X Handshake Secure - HP A5500 EI Command Reference Manual

undo dot1x handshake
View
Layer 2 Ethernet Interface view
Default level
2: System level
Parameters
None
Description
Use the dot1x handshake command to enable the online user handshake function. The function enables
the device to periodically send handshake messages to the client to check whether a user is online.
Use the undo dot1x handshake command to disable the function.
By default, the function is enabled.
HP recommends that you use the iNode client software to ensure the normal operation of the online user
handshake function.
Examples
# Enable the online user handshake function.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/4
[Sysname-GigabitEthernet1/0/4] dot1x handshake

dot1x handshake secure

Syntax
dot1x handshake secure
undo dot1x handshake secure
View
Layer 2 Ethernet Interface view
Default level
2: System level
Parameters
None
Description
Use the dot1x handshake secure command to enable the online user handshake security function. The
function enables the device to prevent users from using illegal client software.
Use the undo dot1x handshake secure command to disable the function.
By default, the function is disabled.
The online user handshake security function is implemented based on the online user handshake function.
To bring the security function into effect, ensure the online user handshake function is enabled.
104