Table of Contents
Advertisement
View
PKI entity view
Default level
2: System level
Parameters
org-unit-name: Organization unit name for distinguishing different units in an organization, a case-
insensitive string of 1 to 31 characters. No comma can be included.
Description
Use the organization-unit command to specify the name of the organization unit to which this entity
belongs.
Use the undo organization-unit command to remove the configuration.
By default, no organization unit name is specified for an entity.
Examples
# Configure the name of the organization unit to which an entity belongs as group1.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] organization-unit group1
pki certificate access-control-policy
Syntax
pki certificate access-control-policy policy-name
undo pki certificate access-control-policy { policy-name | all }
View
System view
Default level
2: System level
Parameters
policy-name: Name of the certificate attribute-based access control policy, a case-insensitive string of 1 to
16 characters. It cannot be ―a‖, ―al‖, or ―all‖.
all: Specifies all certificate attribute-based access control policies.
Description
Use the pki certificate access-control-policy command to create a certificate attribute-based access control
policy and enter its view.
Use the undo pki certificate access-control-policy command to remove certificate attribute-based access
control policies.
No access control policy exists by default.
Examples
# Configure an access control policy named mypolicy and enter its view.
<Sysname> system-view
234
Advertisement
Table of Contents
