Connecting External Keyboard - CAB SQUIX Configuration Manual

Remote Access via VNC
15
60
!
Attention!
For the remote access via VNC the firmware version 5.03 or later must be installed.
VNC is a software that allows remote control of a printer's operation control panel (server) via a computer (client)
through input devices like keyboard and mouse.
VNC ist not platform dependent and enables the use of a Windows computer as well as a mobile Android or iOS
system as an external remote control. The prerequisite for this is the installation of a VNC client on the system used.
Preparing the Computer
 Install the VNC client on the computer.
Preparing the Printer
 Activate the VNC server under Setup > Interfaces > Network services > VNC server.
 Enter password vnc under Security > Password VNC.
For Wireless Access:
 Activate WLAN under Setup > Interfaces > WLAN > WLAN.
 Find out the WLAN-IP-Address under Info.
For Ethernet Access:
 Find out the Ethernet-IP-Address under Info.
Establishing a Connection
 Start the VNC client on the computer.
 Enter the IP address and password vnc in the configuration of the VNC client.
 Activate the connection.
The menu of the printer will be visible and usable vie mouse click, keyboard or touch-pad just like on the printer
itself.
60