Wifi Status - CAB SQUIX Configuration Manual

7 Test Functions
7.6

WiFi Status

Access only when WLAN is activated!

The WiFi status function prints out a list with the most important parameters of the accessible Wireless Access Points.
The printout occurs using the heat level and print speed specified in the Setup > Printing menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start menu.
 Select Test > WiFi status.
The printout can be canceled with
WiFi status
Thu Aug 11 10:15:20 2016
cab SQUIX 4/300
Firmware V5.00 (Jul 28, 2016) - #164162031171
Channel Name/BSS ID
1 default
00:24:b2:36:98:60
1 cab-firma
00:24:b2:36:98:61
1 cab-gast
00:24:b2:36:98:62
11 default
00:24:b2:36:98:60
11 cab-firma
00:24:b2:36:98:61
11 cab-gast
00:24:b2:36:98:62
Figure 16 WiFi status
The parameters have the following meaning :
Column
Channel
Name/BSS ID
Signal level
Security
Parameters of the WiFi status
Table 25
.
Signal level Security
●●●●●
WPA2-PSK
●●●●●
WPA2-PSK
●●●●●
WPA2-PSK
●○○○○
WPA2-PSK
●○○○○
WPA2-PSK
○○○○○
WPA2-PSK
Meaning
Channel; frequency range of the Access Point
Name of the wireless LAN
MAC address of the Access Points
Scale of the WiFi signal strength
Type of data encryption
33