Connecting And Switching On The Device; Connecting The Printer; Connecting To The Power Supply - CAB MACH2 Operator's Manual

3

Connecting and Switching on the Device

10
3.1

Connecting the Printer

!
Attention!
Risk of damage to devices!
Inadequate or no grounding can damage devices and cause malfunctions during operation.
 Ensure that all computers and cables connected to the printer are grounded.
i
Note!
The printer is equipped with a wide area power unit. The device can be operated with a supply voltage of
230 V~/50 Hz or 115 V~/60 Hz without adjustment.
3.1.1

Connecting to the Power Supply

Fig. 7 Connecting Printer to the Power Supply
1. Check that the device is switched off.
2. Plug the jack of the AC adapter (1) into the power connection socket (2).
3. Plug the power cable (3) into the AC adapter (1).
4. Plug the power cable (3) into a grounded socket.
i
Note!
The design of the power plug differs according to the intended country of use.
1
3
10
2