Connecting Label Printer Via Rs-232 Interface; Setting Up A Bluetooth Connection - CAB SQUIX Configuration Manual

2 Connecting Label Printer to Computer
8
2.6

Connecting Label Printer via RS-232 interface

Pin Designation
1 CD
2 TxD
3 RxD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Table 1 Pin assignment of the RS-232 interface
 Connect the 9-pin socket to the matching port of the computer.
 Install the Windows Printer Driver from the DVD included in the delivery contents of the printer.
 Configure the interface parameters of the interface matching to the settings of the computer.  page 19.
2.7

Setting Up a Bluetooth Connection

To set up a Bluetooth connection a Bluetooth USB Adapter (Part No. 5977732) is required.
i
Notice!
A Bluetooth software is delivered with the Bluetooth USB Adapter.
1. Connect the Bluetooth USB adapter an to an USB master interface.
2. Switch on the printer.
3. Install the Bluetooth software on the computer.
4. Start the Bluetooth software.
5. Start "Search devices".
The printer will be shown in a list of Bluetooth devices.
6. Optional : For an well-defined connection of the devices select the printer and click "Connect Devices".
Either a passkey will be shown or a window will be opened where a passkey can be set.  Set a passkey if
necessary .
The display of the printer shows a prompt to enter the passkey too.  Enter the passkey.
7. Select in the software "Connecting" via "Serial Bluetooth Interface".
The new interface, e.g COM5, will be shown
8. Install the current printer with connection via the new COM interface in the label software or in Windows.
Function
Carrier Detect
Transmit Data
Receive Data
Data Terminal Ready (not used)
Ground
Data Set Ready (not used)
Request to Send
Clear to Send
Ring Indication (not used)
8