Device List - CAB SQUIX Configuration Manual

7 Test Functions
7.4

Device List

The Device list function prints out the most important information on hardware components of the printer and connected
devices. The printout occurs using the heat level and print speed specified in the Setup > Printing menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start menu.
 Select Test > Device list.
The printout can be canceled with
Device list
Thu Aug 11 10:06:29 2016
cab SQUIX 4/300MP
Firmware V5.00 (Jul 28, 2016) - #164162031171
Name Description
CPU X4, #164162031171
PCB-Rev. 0, FPGA-Rev. 12
TPH 105.7mm 11.806dots/mm X4 V59-0051, #59-0059
Resistance: 1154R
Manf. Fri Apr 8 10:03:42 2016
First: Thu Jun 2 16:07:12 2016
Last: Thu Aug 11 08:37:08 2016
I/F 1 Ethernet 10/100 MBit/s
MAC: 70:82:0e:99:91:63
I/F 2 USB 2.0 Device
I/F 3 RS-232
IFFS 45 MByte
USBMEM 3928 MByte
SD 3465 MByte
USB [1] Linux 3.10.4 ehci_hcd/EHCI Host Controller
High #ci_hdrc.1,Rev. 3.10
Mfr. 1D6B, ID: 0002, Class: 09/00, Protocol: 01
Driver: hub
USB [2] Cypress Semiconductor Corp./USB2.0 Hub
High Rev. 32.99
Mfr. 04B4, ID: 6570, Class: 09/00, Protocol: 01
Driver: hub
USB [3] Cambridge Silicon Radio, Ltd.
Full Rev. 52.76
Mfr. 0A12, ID: 0001, Class: E0/01, Protocol: 01
Driver: btusb
USB [4] cab/Service-Key
Full #11-10296933,Rev. 1.06
Mfr. 0985, ID: 0BD8, Class: FF/00, Protocol: FF
Driver: cab_key
Figure 14 Device list
Parameters marked italic are only printed when the service key is inserted
Name
CPU
TPH
IF [x]
IFFS
USBMEM
SD
USB [a]
Speed
HEALTH
Line pattern
Parameters of the Device list
Table 24
.
USB [5] Microchip Technology Inc./AR1100 HID-DIGITIZER
Full Rev. 1.01
Mfr. 04D8, ID: 0C03, Class: 00/00, Protocol: 00
Driver: usbhid
USB [6] Ralink/802.11 n WLAN
High #1.0,Rev. 1.01
Mfr. 148F, ID: 5370, Class: 00/00, Protocol: 00
Driver: rt2800usb
USB [7] USB /Flash Disk
High #90730B001E66,Rev. 1.10
Mfr. 13FE, ID: 1D00, Class: 00/00, Protocol: 00
Driver: usb-storage
USB [8] Cypress Semiconductor Corp./USB2.0 Hub
High Rev. 32.99
Mfr. 04B4, ID: 6570, Class: 09/00, Protocol: 01
Driver: hub
HEALTH PS 23,8V, BATT OK, TPH 27,9°C
Information
Type and serial number of the PCB CPU
Revision of PCB CPU and FPGA
Print width and resolution of the installed thermal printhead
Type of interfaces installed
x: Number of interface
Size of the Internal Flash File System
Size and type of an installed USB storage device
Size and type of an installed SD card
Type and revision of installed USB devices
a: number of USB device
Speed: data transfer speed (low, full, high)
The following properties are only displayed when the service key is inserted:
Mfr.: Manufacturer ID. This identifies the manufacturer of the USB device
Class: Code for the USB device class
Protocol: Code for the type of communication with the USB device
Phase: Internal value for troubleshooting
Printhead voltage, charge state of the lithium battery on the PCB CPU,
temperature of CPU and printhead
Lines differing in thickness at various distances. They are used to evaluate the print
quality.
31