Font List - CAB SQUIX Configuration Manual

7 Test Functions
30
7.3

Font list

The Font list function prints the most important parameters of the fonts available in the printer in tabular form. The table
contains both the original fonts in the printer and other fonts loaded into the printer. The printout occurs using the heat
level and print speed specified in the Setup > Printing menu.
i Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start menu.
 Select Test > Font list.
The printout can be canceled with
Thu Aug 11 09:44:06 2016
cab SQUIX 4/300MP
Firmware V5.00 (Jul 28, 2016) - #164162031171
No. Name
-1 _DEF1
-2 _DEF2
-3 _DEF3
-4 OCR_A_I
-5 OCR_B
3 BX000003
5 BX000005
596 BX000596
1000 GHEI21M
1010 GARUDA
Figure 13
Column
No.
Name
Type
Description
Table 23
Font list
Type Description
Bitmap Default Font 12x12 dots
Bitmap Default Font 16x16 dots
Bitmap Default Font 16x32 dots
Bitmap OCR-A Size I
Bitmap OCR-B
TrueType Swiss 721
TrueType Swiss 721 Bold
TrueType Monospace 821
TrueType AR Heiti Medium GB-Mono
TrueType Garuda
Font list
Meaning
ID number of the font required for programming (command T).
Name with which the font is saved internally.
Type of font generation. It provides information on the variability of the font and is important when
programming (command T).
Explanations of the font: size, font family. The printout occurs in the appropriate font.
Parameters of the Font list
.
30