Extras; Firmware Update; Save Settings - CAB SQUIX Configuration Manual

Extras

9
40
9.1

Firmware Update

i
Notice!
The firmware file can be obtained from the internet.
Access only with external storage device!

 Copy the firmware file to the "misc" directory of the storage device. This can be done on a computer or via FTP on
the printer.
 Insert the prepared storage device into the printer.
 Start menu.
 Select Extras.
If the menu is protected via a PIN a prompt appears in the display. Enter the code number and confirm it.
 Select Firmware update.
The display shows the selection of external storage devices and the firmware files stored on the devices.
 Select a file and confirm with
The selected firmware file is copied. A progress indicator is displayed while the firmware is being copied. After
completion the printer will be re-started.

i Notice!
The firmware update also can be done via FTP printer management  "13.4" on page 55.
9.2

Save Settings

With the Save settings function the printer configuration can be saved to a storage device.
 Start menu.
 Select Extras.
If the menu is protected via a PIN a prompt appears in the display. Enter the code number and confirm it.
 Select Save settings.
 Select the external storage device.
 Enter a file name.
The predefined name is composed of the identifier "gui", date, clock time and the suffix ".xml", but may also be
altered.
 Confirm the selection with
An error message appearing during the saving procedure may be caused by an unreadable medium (e.g. unknown
medium, unformatted medium)  "14.5.4" on page 58.
.
. The .xml file will be stored in the folder /misc of the storage device.
40