Start-Up; Contents Of Delivery; Connecting To Power Supply - CAB ER4 Series Operator's Manual

3

Start-Up

8
3.1

Contents of Delivery

 Check the external rewinder for damages in transit and completeness.
Contents of delivery:
• External Rewinder
• Clamp
• 2 Rewind Adapters
• Plate for ER4/210 or Plate for ERx/300
• Power Cable
• Documentation
i
Note!
 Please keep the original packaging in case the device must be returned.
3.2

Connecting to Power Supply

The rewinder is equipped with a wide range power unit (100-240 V~), so it is possible to use the printer both with a
voltage of 230 V~/50 Hz and with a voltage of 115 V~/60 Hz without changes.
Caution!
!
Risk of injury by rotating parts!
 Ensure that the power switch (1) is in position „O" (OFF) before connecting the printer to a power
supply !
When switching on the Rewinder starts immediately without or with loose material.
ER4/210
1
2
3
Figure 3 Connecting to power supply
 Connect the supplied power cable (3) to the power input module (2) and to a grounded outlet.
ERx/300
1
2
3
8