Clear Cmos; Figure 46 Jp1- Clear Cmos Jumper - Cybernet Elite-4i User Manual

Cybernet Elite-4i User Guide

4.14 Clear CMOS

You may need to clear the CMOS if you are unable to boot-up the system due to a
forgotten password, an incorrect CPU clock setup, or the need to reset the CMOS
settings to default values after the system BIOS has been updated.
Power off the system and disconnect the power cable.
Locate JP1 and remove the shunt from pin 2 and 3 and place it on pin 1 and pin 2
for two seconds. Place the shunt back on pin 2 and pin 3 of JP1.

Figure 46 JP1- Clear CMOS Jumper

C M O S S e t u p U t i l i t y 55