The Power Button; The Indicator Panel; Figure 1 Indicator Panel - Cybernet Elite-4i User Manual

Cybernet Elite-4i User Guide
1.2

The Power Button

To press Power Button will turn-on or turn-off the unit, or turn the unit to suspend
mode.
1.3

The Indicator Panel

There are five LEDs on the Elite-4i indicator panel as follows from left to right:
LED Name
100Mbps LED
10Mbps LED
Power / ACPI
Standby LED
HDD LED
FDD LED
2

Figure 1 Indicator Panel

Color
Green This LED will light to indicate LINK
(10/100/1000Mbps) mode.
Amber This LED will light to indicate LAN ACTIVE.
Blue This LED will light by turning on the unit. It will
turn off when the system is shut down or enters
ACPI standby mode to indicate that DC power
is not available.
Amber This LED will light to indicate hard drive and
optical drive activity.
Green This LED will light to indicate floppy drive or
flash card activity.
Indications
E l i t e - 4 i I n t r o d u c t i o n