Onboard Device Sub Menu; Figure 40 Onboard Device Screen - Cybernet Elite-4i User Manual

Setting Options: Auto, Mode 0, Mode 1, Mode 2, Mode 3, and Mode 4.
Primary/Secondary Master/Slave UDMA
UDMA (Ultra DMA) is a DMA data transfer protocol that utilizes ATA commands
and the ATA bus to allow DMA commands to transfer data at a maximum burst rate
of 33 MB. When you select Auto in the four IDE UDMA fields (for each of up to
four IDE devices that the internal PCI IDE interface supports), the system
automatically determines the optimal data transfer rate for each IDE device.
Setting Options: Auto, Disabled.

4.4.4.2 ONBOARD DEVICE Sub Menu

USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
áâßà Move Enter:Select +/-/PU/PD:Value F10:Save
F5: Previous Values
USB Controller
The default setting is Enabled.
Setting Options: Enabled, Disabled.
USB 2.0 Controller
The default setting is Enabled.
Setting Options: Enabled, Disabled.
USB Keyboard Support
The default setting is Enabled.
Setting Options: Enabled, Disabled.
USB Mouse Support
The default setting is Enabled.
Setting Options: Enabled, Disabled.
C M O S S e t u p U t i l i t y
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Device
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Auto]
F6: Fail-safe defaults

Figure 40 Onboard Device Screen

Cybernet Elite-4i User Guide
Item Help
Menu Level >
ESC:Exit F1:General Help
F7:Optimized Defaults
45