Integrated Peripherals; Figure 38 Integrated Peripherals Screen - Cybernet Elite-4i User Manual

Memory Hole at 15M-16M
You can reserve this area of system memory for ISA adapter ROM. When this
area is reserved, it cannot be cached. The user information of peripherals that need
to use this area of system memory usually discusses their memory requirements.
The default setting is Disabled.
Setting Options: Enabled, Disabled.
AGP Aperture Size (MB)
Select the size of Accelerated Graphics Port (AGP) aperture. The aperture is a
portion of the PCI memory address range dedicated for graphics memory address
space. Host cycles that hit the aperture range are forwarded to the AGP without
any translation. The default setting is 128MB.
Setting Options: 4M, 8M, 16M, 32M, 64M, 128M, 256M.
Init Display First
This item allows you to decide which bus to activate first (PCI Slot or AGP).
The default setting is Onboard/AGP
Setting Options: PCI Slot, Onboard/AGP.

4.4.4 Integrated Peripherals

If the INTEGRATED PERIPHERALS option is selected from the main menu, the
screen below will appear.
> OnChip IDE Devices
> Onboard Devices
> SuperIO Devices
áâßà Move Enter:Select +/-/PU/PD:Value F10:Save
F5: Previous Values
The Integrated Peripherals Screen contains three sub-menus can be entered by
pressing the Enter key to the right of the list.
C M O S S e t u p U t i l i t y
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
[Press Enter]
[Press Enter]
[Press Enter]
F6: Fail-safe defaults

Figure 38 Integrated Peripherals Screen

Cybernet Elite-4i User Guide
Item Help
Menu Level >
ESC:Exit F1:General Help
F7:Optimized Defaults
43