Table of Contents
Advertisement
Cybernet Elite-4i User Guide
setting is "250" ms.
Security Option
This setting controls the password feature. The options are "Setup" and "System."
Selecting "Setup" will protect the configuration settings from being tampered with.
Select "System" if you want to use the password feature every time the system boots
up. The default setting is "Setup". You can create your password by using the
"SUPERVISOR/USER PASSWORD" utility in the main program screen.
APIC Mode
Default setting is "Disabled".
MPS Version Control for OS
Default setting is "1.4".
OS Select For DRAM > 64MB
Set to "OS2" if the system memory size is greater than 64 MB and the operating
system is OS/2. The default setting is "Non-OS2".
Report No FDD for Win95
Default setting is "No".
Setting Options: Enabled, Disabled.
Small Logo (EPA) show
The default setting is "Disabled".
Setting Options: Enabled, Disabled.
C M O S S e t u p U t i l i t y
41
Advertisement
Table of Contents
