Table of Contents
Advertisement
Select Enabled if your system has an ACPI function.
Setting Options: Enabled, Disabled.
ACPI Suspend Type
The default setting is S3(STR)
Setting Options: S1(POS), S3(STR), S1&S3.
Power Management
The default setting is User Define.
Setting Options: User Define, Min. Saving, Max. Saving.
Video Off Method
This determines the manner in which the monitor is blanked.
Blank Screen
V/H SYNC+Blank
DPMS
(Default)
MODEM Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if any) on your
system. Activity of the selected IRQ always awakens the system.
The default setting is 3.
Setting Options: NA, 3, 4, 5, 7, 9, 10, 11.
HDD Power Down
By default, this item is Disabled, meaning that no matter the mode of the rest of the
system, the hard drive will remain ready. Otherwise, you have a range of choices
from 1 to 15 minutes. This means that you can elect to have your hard disk drive
be turned off after a selected number of minutes.
Soft-Off by PWR-BTTN
You could press the power button for more than 4 seconds forcing the system to
enter the Soft-Off state when the system has hung.
The default setting is Delay 4 Sec.
Setting Options: Instant Off, Delay 4 Sec.
Power On by Ring
The default setting is Enabled, a signal from ring returns the system to Full On state.
Setting Options: Disabled, Enabled
C M O S S e t u p U t i l i t y
This option only writes blanks to the video buffer.
This selection will cause the system to turn off
the vertical and horizontal synchronization ports
and write blanks to the video buffer.
Select this option if your monitor supports the
Display Power Management Signaling (DPMS)
standard of the Video Electronics Standards to
select video power management values.
Cybernet Elite-4i User Guide
49
Advertisement
Table of Contents
