Bodywork
the cable grommet in the right bracket
(11).
•
Using the upper bayonet mount, con-
nect the frame, complete with wind-
shield, to the fasteners (2) which have
just been assembled.
•
Secure the lower mounting bracket (5)
to the lower steering yoke using the two
screws (4).
•
Slightly widen the cable grommet (11)
and pass the accelerator cables
through as illustrated.
•
Slightly lubricate the rubber blocks (12)
and insert them into the frame pipes.
Battery
•
Unscrew and remove the four screws
in the figure.
•
Remove the battery cover.
BODYW - 414
Moto Guzzi California 1400