MOTO GUZZI B043157 Service Station Manual page 346

Chassis
Checking
Carefully check:
The splines on the cardan shaft (1) must be intact,
free from grain or dents.
Check that the joints (2) are not hardened or ex-
cessively loose, otherwise replace it.
In the figure are shown two worn toothing profiles:
•
Profile (3) shows acceptable wear, the
cardan shaft should not be replaced.
•
Profile (4) shows unacceptable wear,
the cardan shaft must be replaced.
Stand
CHAS - 346
Moto Guzzi California 1400