MOTO GUZZI B043157 Service Station Manual page 348

Chassis
pos. Description
1 Exhaust - cylinder retainer nut
2 Side clamps
3 Heat shield fixing screws
4 Central manifold clamp
5 Screws fixing mufflers support to mufflers
6 Terminal fixing screws
Removing the manifold - tail pipe
•
The following procedure applies to
both exhausts.
•
Loosen and remove the three fixing
screws of the heat shield.
•
Remove the heat shield.
•
Loosen the side clamp.
•
Loosen the lower clamp.
CHAS - 348
Moto Guzzi California 1400
D
ISCHARGE
Type Quantity
M8 4 25 Nm (18.44 lb ft)
- 2 50 Nm (36.88 lb ft)
M6x10 10 8 Nm (5.90 lb ft)
- 1 20 Nm (14.75 lb ft)
M8x12 6 25 Nm (18.44 lb ft)
- 4 25 Nm (18.44 lb ft)
Torque Notes
-
-
-
-
Loctite 243
-