Moto Guzzi California 1400
8. Flywheel-side
9. Piston cooling jets
10.Auxiliary shaft
11.Chain tensioner
12.Camshaft
13.Hydraulic tappet with roller
14.Rocker axes
Oil pump
Removing
•
Bring the left cylinder piston to the TDC in combustion phase.
•
Mark a reference on the oil pump control gear and another on the driven gear so as to place
them correctly again upon refitting.
•
Unscrew and remove the nut on the crankshaft.
•
Remove the oil pump control gear.
•
Screw the nut again so that the internal shim washer does not fall in the crankshaft crank-
case.
•
Unscrew and remove the driven gear
nut.
•
Collect the washer.
•
Remove the oil pump driven gear.
•
Remove the driving pin.
Engine
ENG - 281