MOTO GUZZI B043157 Service Station Manual page 106

Electrical system
Perform the check of the instrument panel and button connectors. Check the good condition and the
wiring continuity:
•
between instrument panel PIN 33 and Yellow/Pink button cable
•
between instrument panel PIN 15-16 and Blue/Black button cable
Error code B0205 (REAR BRAKE ON THE LINE NORMALLY CLOSED ERROR)
Troubleshooting
Perform the check of the instrument panel and button connectors. Check the good condition and the
wiring continuity:
•
between instrument panel PIN 39 and Brown/Green button cable
•
between instrument panel PIN 15-16 and Blue/Black button cable
Error code B0206 (REAR BRAKE ON THE LINE NORMALLY OPENED ERROR)
Troubleshooting
Perform the check of the instrument panel and button connectors. Check the good condition and the
wiring continuity:
•
between instrument panel PIN 38 and Yellow/Purple button cable
•
between instrument panel PIN 15-16 and Blue/Black button cable
The instrument panel controls the brake switches and sends through the CAN line the status relative
to the control unit that activates the stop, the same applies for the cruise button.
IMMOBILIZER AERIAL
Function
detects the transponder code in the key and sends
it to the instrument panel
Level in electrical circuit diagram:
Immobilizer
Location:
•
on the vehicle: in the instrument panel
•
connector: grey two-way, under the
right side steering column
Electrical specifications
•
14 Ohm
Pin out
not significant
IMMOBILIZER ERRORS
Error code B0003 (KEY CODE READ BUT NOT RECOGNISED)
The key has the working transponder, but it is not within the recognised ones.
Troubleshooting
ELE SYS - 106
Moto Guzzi California 1400