Moto Guzzi California 1400
•
Fit the movable chain slider.
•
Fit the upper gear.
•
Fit the chain tensioner and the chain
tensioner cap temporarily and keep the
chain taut on the service shaft.
LEFT CYLINDER
•
Fit the piston.
•
Remove the cloth used to prevent for-
eign bodies from getting into the crank-
case.
•
Turn the rings so that the coupling ends
are 120 degrees from each other.
•
Place a new metal gasket between the
crankcase and the cylinder.
•
Place the two dowel pins on the stud
bolts.
•
Undo the screw which will be used to
time the upper gear.
•
Check that the oil in the left cylinder
chain tensioner has been drained off
by compressing it. If the operation is
difficult, use a pin drive to push the
central hole so that the oil is drained off
from the circuit.
•
Fit the chain tensioner in the cylinder.
•
Lubricate the piston and the cylinder.
•
Lock connecting rod motion with the
fork tool.
•
Using the suitable piston ring clamp
tool, place the cylinder and fit the chain
in the timing system plate.
CAUTION
Engine
ENG - 259