Engine
•
Screw two screws in the threaded
holes of the timing system upper gear.
•
Rotate the camshaft so that its pin is
aimed towards the hole in the timing
system chain.
•
Place the gear in the chain.
•
On the left camshaft pin, fit the hole
marked with the letter "L" of the timing
system gear.
•
Block the left chain tensioner hole with
screw and washer.
•
Rotate the crankshaft clockwise by
270° from the timing system side so
that the right cylinder piston reaches
the TDC; lock crankshaft rotation.
•
Also determine the thickness of the
gasket for the right cylinder, to be fitted
between the head and the cylinder as
described in the section: Shimming
system.
•
Place the two dowel pins.
•
Fit the gasket with the correct thick-
ness between the head and the cylin-
der.
•
Fit the right cylinder head.
•
Unscrew and remove the right chain
tensioner cap.
ENG - 262
Moto Guzzi California 1400