Moto Guzzi California 1400
•
Screw two screws in the threaded
holes of the timing system upper gear.
•
Rotate the camshaft so that its pin is
aimed towards the hole in the timing
system chain.
•
Place the gear in the chain.
•
On the right camshaft pin, fit the hole
marked with the letter "R" of the timing
system gear.
•
Screw the cap of the right chain ten-
sioner.
•
Undo and remove the screws used to
place the gear on the camshaft.
•
Place the bulkhead and align the holes
with the timing system gear.
•
Fix the bulkhead on the timing system
gear using a screw with Loctite on the
thread.
•
Tighten the screw to the prescribed tor-
que.
•
Also place the bulkhead of the other
head.
•
Place the cap.
•
Tighten the two screws to the prescri-
bed torque.
•
Also place the cap of the other head.
•
Adjust valve clearance.
See also
Checking the valve clearance
OPTION 02
Engine
ENG - 263