Moto Guzzi California 1400
•
Undo and remove the timing sensor
fixing screw.
•
Remove the timing sensor and its O-
Ring
See also
Removing the generator
Service shaft removal
•
Remove the tone wheel.
•
Remove both cylinders.
•
Undo and remove the two screws.
•
Remove the service shaft closing cap.
•
Mark the timing chains so as not to in-
vert the direction of rotation upon fit-
ting.
•
Slide off the service shaft from the
chains.
•
Remove both chains.
See also
Engine
ENG - 247