Moto Guzzi California 1400
•
The reference on the piston ring must
be facing the piston crown.
•
Fit the piston rings on the piston: - the
oil scraper in the lower slot; - the thicker
smooth ring in the intermediate slot; -
the less thick smooth ring in the upper
slot.
•
The piston rings must be offset at 120°
one from the other.
•
Fit one of the two pin snap rings on the
piston.
•
Lock crankshaft rotation.
Specific tooling
12.91.18.01 Tool to lock the flywheel and the
starting ring gear
•
Fit the piston.
NOTE
CHECK THE ORIENTATION OF THE PISTON ACCORDING TO THE REFERENCES AT THE TOP.
DO NOT ASSEMBLE PISTONS AND CYLINDERS OF DIFFERENT SELECTOR TYPES.
•
Insert the pin.
•
Insert the snap ring.
Specific tooling
020470Y Pin snap ring fitting tool
Engine
ENG - 257