Moto Guzzi California 1400
•
The stop light logic relay is energised (No. 19 on the electrical circuit diagram, position to
the right of the battery, in any case VERIFY identification of the relay with the colour of the
cables)
Error clearing
Ambient parameter reading
•
Throttle valve position objective angle
•
Rear throttle valve position
•
Front throttle valve position
•
Engine Temp. before Recovery
•
Cylinders intake average pressure
•
Engine rpm
•
Indicated average torque
•
Engine status - Indefinite_Key ON_Running engine_Stopped_Power latch_Power latch
2_Power latch finished
•
Odometer
•
Mapping selection - Indefinite/Track/Sport/Road
DIAGNOSTIC TOOL: ELECTRICAL ERRORS
EEPROM Error P0601
•
circuit not operational
Error cause
•
Replace injection ECU. The instrument panel does not indicate the presence of this error
even in the ATT status
RAM Error P0604
•
circuit not operational
Error cause
•
Replace injection ECU. The instrument panel does not indicate the presence of this error
even in the ATT status
ROM Error P0605
•
circuit not operational
Error cause
•
Replace injection ECU. The instrument panel does not indicate the presence of this error
even in the ATT status
A/D converter P0607
•
circuit not operational
Error cause
Electrical system
ELE SYS - 113