Moto Guzzi California 1400
•
Adjust the preloading of the steering
bearings by tightening the lower ring
nut to the prescribed torque.
•
Turn the steering 3-4 times completely
from right to left and then check correct
tightening torque of such ring nut.
•
Fit the upper ring nut, tightening it manually, plus about 90 degrees so that the grooves are
lined up.
•
Position the safety washer, reiterating the tabs on the ring nuts.
•
Rivet the tongues on the upper ring nut.
See also
Removing
Suspensions
SUSP - 323