Moto Guzzi California 1400
•
Place the flywheel-side flange on the
crankshaft and check if the dowel pin
with the O-ring is correctly placed.
•
Apply Teflon tape on the two lower fix-
ing screws at the back in order to pre-
vent oil leaks.
•
Screw the eight flange screws on the
flywheel side proceeding diagonally.
•
Remove the sealing ring centring tool from the crankshaft.
Specific tooling
12.91.20.00 Tool to fit the flywheel-side flange together with seal ring on the crankshaft
•
To avoid that shim inside the crank-
case moves from its seat; fit on the
crankshaft, on the alternator side, the
two gears and the nut.
Engine
ENG - 275